24
fig. 20
Fitting the integrated
appliance door
Where non-standard integrated appliance
doors are supplied, additional fitting
instructions are required to ensure
compatibility with this product.
The machine is supplied with a fitting
template and these instructions should be
followed as normal.
However, the fitting template needs to be
located lower down the fascia door; this is
shown below.
The amount of offset, Y, depends on
the height of the fascia door and can be
calculated as X = 723mm.
For example, if you have a 731mm tall
fascia door and are fitting a door to your
dishwasher, then Y = 731-723 = 8mm.
Ensure that the hinge tensioners are
adjusted to balance the weight of the door.
Fitting template
Y off
set
X Door height