Matrix MW001 Скачать руководство пользователя страница 4

Getting to know your dishwasher

Starting a Programme

  Turn on the water tap

  Press the Power button.

  Press the Programme Selection button until the required programme light is illuminated.

 

When you close the door, the dishwasher will beep once and the programme will start automatically.

Interrupting the programme

If possible do not open the door once the programme has started.

•  First open the door slightly to reduce the risk of water spillage.
•  Wait until the spray arm has stopped turning before opening door fully.
•  Whilst the door is open, the dishwasher will beep 10 times every 3 seconds.
•  If the dishwasher has already heated up, then leave the door open to allow the steam to escape to prevent the door  
 

opening due  to cabinet pressure.

At the End of a Programme

When the dishwasher programme is complete, the dishwasher will beep six times and the Programme Indicators will go 
out.  Open the dishwasher door.

  Press the Power button to switch off the dishwasher.

  Turn off the water tap and remove the plug from the power socket. 

Please note: The dishwasher will automatically continue on the programme it has started if the door is 
opened or in the event of a power cut.

MW001IN

Programme Indicator Lights

Programme

Selection Button

Salt

Indicator

Light

Quick Wash

Indicator Light

Quick Wash

Button

Delay Timer Indicator

Lights

Delay Timer

Button

Power

Button

Programme indicator lights

Programme selection button

Power button

a

d

e

f

g

h

b

c

Close-up view (control panel)

Dishwasher Interior 

a  Upper Rack
b  Lower Rack
c  Top Spray Arm
d  Cutlery Basket
e  Bottom Spray Arm
f  Salt Container Cup
g  Washing Filter
h  Detergent and Rinse Aid  
 

Dispenser

3

Содержание MW001

















Отзывы: