Installation
s
$ONOTINSTALLTHISAPPLIANCEIFITISDAMAGEDINANYWAY)NSTALLINGA
damaged appliance may invalidate the warranty.
s
The water supply tap should be located in an adjacent cupboard so that it
can be accessed after installation.
s
%NSURETHEAPPLIANCEISLEVELBYADJUSTINGTHEFEETASNECESSARY
s
/NLYUSETHEWATERINLETSUPPLIEDWITHTHEAPPLIANCE
s
)FTHEWATERPRESSUREISABOVEBARAPRESSURERELIEFVALVESHOULDBEUSED
s
After connecting the water supply, check to ensure there are no leaks.
s
The water outlet can either be connected to a water drain or to a sink outlet
SPIGOT4HISCONNECTIONSHOULDBEATAMINIMUMOFCMANDAMAXIMUM
OFCMFROMTHEmOOR4HEDRAINHOSESHOULDBENOLONGERTHANMIN
length to ensure good performance from the dishwasher.
fig 14
fig 15
fig 16
fig. 11
14
Important installation information
• Do not install this appliance if it is damaged in any way. Installing damage
appliance may invalidate the warranty.
• The water supply tap should be located in an adjacent cupboard so the it
can be accessed after installation.
• Ensure the appliance is level by adjusting the feet as necessary.
• Only use the water inlet supplied with the appliance.
• If the water pressure is above 10 bars, a pressure relief valve should be used.
• After connecting the water supply, check to ensure there are no leaks.
• The water outlet can either be connected to water drain or to a sink outlet
spigot. This connection should be at a minimum of 50cm and a maximum
of 110cm from the floor. The drain hose should be no longer than 4m in
length to ensure good performance from the dishwasher.
• To prevent damage to the floor surface, install the appliance on the plastic
skids provided. Failure to do so will invalidate the warranty.
• Ensure that the door mechanism is tensioned correctly as outlined in the
installation instructions provided
Installation
s
$ONOTINSTALLTHISAPPLIANCEIFITISDAMAGEDINANYWAY)NSTALLINGA
damaged appliance may invalidate the warranty.
s
The water supply tap should be located in an adjacent cupboard so that it
can be accessed after installation.
s
%NSURETHEAPPLIANCEISLEVELBYADJUSTINGTHEFEETASNECESSARY
s
/NLYUSETHEWATERINLETSUPPLIEDWITHTHEAPPLIANCE
s
)FTHEWATERPRESSUREISABOVEBARAPRESSURERELIEFVALVESHOULDBEUSED
s
After connecting the water supply, check to ensure there are no leaks.
s
The water outlet can either be connected to a water drain or to a sink outlet
SPIGOT4HISCONNECTIONSHOULDBEATAMINIMUMOFCMANDAMAXIMUM
OFCMFROMTHEmOOR4HEDRAINHOSESHOULDBENOLONGERTHANMIN
length to ensure good performance from the dishwasher.
fig 14
fig 15
fig 16
40cm
100cm
Installation
s
$ONOTINSTALLTHISAPPLIANCEIFITISDAMAGEDINANYWAY)NSTALLINGA
damaged appliance may invalidate the warranty.
s
The water supply tap should be located in an adjacent cupboard so that it
can be accessed after installation.
s
%NSURETHEAPPLIANCEISLEVELBYADJUSTINGTHEFEETASNECESSARY
s
/NLYUSETHEWATERINLETSUPPLIEDWITHTHEAPPLIANCE
s
)FTHEWATERPRESSUREISABOVEBARAPRESSURERELIEFVALVESHOULDBEUSED
s
After connecting the water supply, check to ensure there are no leaks.
s
The water outlet can either be connected to a water drain or to a sink outlet
SPIGOT4HISCONNECTIONSHOULDBEATAMINIMUMOFCMANDAMAXIMUM
OFCMFROMTHEmOOR4HEDRAINHOSESHOULDBENOLONGERTHANMIN
length to ensure good performance from the dishwasher.
fig 14
fig 15
fig 16
fig. 13