www.szmatrix.com
11
11. Communication protocol selection: SE10 PLC SCPI (the communication protocol has two options, SCPI and
MODBUS, use the CH2 voltage knob to turn left and right to modify).
12. Communication protocol end character selection: SE11 CEND LF (Communication protocol end character has
CR, LF, CRLF, LFCR to choose from, use the CH2 voltage knob to turn left and right to modify).
4.5 OCP/OVP function introduction
Long press the voltage/current adjustment knob to enter the OVP/OCP function setting, and lightly press the
"one-key series/parallel/function menu button" to exit the setting. When the OVP/OCP value is set and the
function is on, the output is now When the voltage or current exceeds the OVP/OCP setting value, the
corresponding channel will prompt OVP/OCP and turn off the output. The setting content is as follows:
1. OCP setting:
