Matrix MI3932 MIAC AllCode Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 29

Matrix MI3932 MIAC AllCode Скачать руководство пользователя страница 9

Page 9

Copyright © 2017 Matrix Technology Solutions Limited

www.matrixtsl.com

Bluetooth setup

Windows PC

3) Determine the COM port number

You should get a popup balloon on the task bar saying device is ready to use. If you click
this before it fades away then you can find out the COM port assigned to the MIAC.

You use this COM port number when
communicating with the MIAC AllCode and this
COM port number will stay the same as long as
you do not remove or unpair the MIAC from
Windows.

If you did not see the COM port when the MIAC
was paired, you can find it in the Bluetooth
Settings window, as shown on the right.

There are two COM ports listed for each MIAC.
Make sure you always use the “outgoing” port
number.

This window can be a bit hard to find on some
versions of Windows. For example, on Windows 10
you can find this via the “More Bluetooth options”
link on the Bluetooth settings screen.

Luckily, there is a guaranteed way of opening this
window in all versions of Windows from version 7. Open the “Run…” window by holding the
Windows key and pressing R, then
type (or copy and paste) the following command into the box and press “OK”:

rundll32.exe shell32.dll,Control_RunDLL bthprops.cpl,,2

Now you have paired the MIAC and determined the COM port number, you can use any of
the many programming languages available on Windows to control the MIAC AllCode.

MIAC AllCode
Instructional Guide

«
...
7
8
9
10
11
...
»

Содержание MI3932 MIAC AllCode






























Отзывы:

Нет отзывов