Matrix MI3932 MIAC AllCode Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 29

Matrix MI3932 MIAC AllCode Скачать руководство пользователя страница 15

Page 15

Copyright © 2017 Matrix Technology Solutions Limited

www.matrixtsl.com

Controlling the MIAC

Using Flowcode

MIAC AllCode
Instructional Guide

This section explains how to use Flowcode to control the MIAC
AllCode.

As you probably know, Flowcode provides component macros for
all complex devices like CAN bus, ZigBee, and the MIAC AllCode

There are programs on the Matrix website to inspire and help you.

https://www.matrixtsl.com/allcode/resources/

This section assumes you are familiar with the basics of using Flowcode. There are two
ways of using Flowcode to control the MIAC AllCode.

    1) using the in-built API functionality
    2) re-programming the firmware on the MIAC.

In Flowcode 7.3 and later there is a component available
from the MIAC component menu to allow you to easily
control the MIAC AllCode via the command API.

The component comes with a fully operational simulation allowing us to create and test programs
before we move to the hardware.

The component’s Mode property allows us to decide if we are using the component to control the
simulation or the real hardware.

Bluetooth / Serial Component Properties WIFI Component Properties

The Bluetooth and Serial mode has a COM port property that points to the MIAC AllCode. This
COM port number can be found in the Bluetooth pairing section of this document.

The WIFI mode has a Network Interface option, this allows you to specify the network adapter
connected to the same network as the MIAC AllCode should you have more than one Network
adapter available on your PC. The MIAC IP address should be entered so that it matched the IP
address shown on the MIAC display when entering API mode.

«
...
13
14
15
16
17
...
»

Содержание MI3932 MIAC AllCode






























Отзывы:

Нет отзывов