18
Reversing the door
We recommend you seek the help of another individual to support the
doors whilst performing this operation
1. Carefully prise off the cover cap for the top hinge and unscrew the screws
fixing the top hinge to the appliance, you should support the upper door
whilst doing this.
2. Carefully remove the upper door and place it somewhere safe. Note that
there are spacers between the door and the hinge; note how many and
their position.
3. Remove the central hinge by removing the 3 screws fixing it to the
appliance; support the lower door whilst doing this.
4. Remove the lower door and place it somewhere safe, again noting the
position of any spacer pieces.
5. Swap the bottom hinge to the opposite side.
6. Refit the lower door using any spacers and position the central hinge on
the door. After removing the 3 cover caps, fix the hinge
securely to the appliance.
7. The top hinge and replacement cover hinge covers are included in the
fittings pack. Refit the upper door and the new top hinge
and fix it securely to the appliance.
8. Fit the central cover caps and top hinge cover pieces in place to complete
the process.
Ensuring the door seals correctly:
It is normal for the seal to be compressed after the door has been reversed.
With the door closed, use a hair dryer to cause the seal to expand and fill
the gap between the door and the body of the appliance.