14
Changing the light bulb
Disconnect the appliance from the
power.
•
Release the light cover by pressing on the
hooks at the back of the cover, then slide it
towards the back of the fridge to remove
it.
•
Unscrew the light bulb to remove it and
replace with a new bulb of the same rating
(not more than 15W).
•
Replace the light cover and reconnect the
power.
Troubleshooting
If you have any problems with your appliance, you should check
the troubleshooting prior to calling CDA Customer Care to prevent
unnecessary service calls and potential cost.
If the appliance is not working
•
Check there is power to the appliance.
•
The green light on the control panel is lit.
•
The house fuses are intact and the fuse in the plug has not blown.
•
The thermostat is not set to off.
•
The plug socket is functioning fine. To check this, plug another electrical
appliance in to see if the socket is faulty.
fig. 6