Matrix MD-S70, Руководство пользователя

Страница: 3 / 20

3
WARNING
DEATH OR SERIOUS INJURY CAN OCCUR ON THIS
EQUIPMENT. FOLLOW THESE PRECAUTIONS TO AVOID
INJURY!
1. Keep children under the age of 14 away from this
strength training equipment. Teenagers must be
supervised at all times while using this
equipment.
2. This equipment is not intended for use by persons
with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the equipment by a
person responsible for their safety.
3. All warnings and instructions should be read and
proper instruction obtained prior to use. Use this
equipment for its intended purpose ONLY.
4. Inspect the machine before use. DO NOT use
machine if it appears damaged or inoperable.
5. Do not exceed weight capacity of this equipment.
6. Check to see that the selector pin is completely
inserted into the weight stack.
7. NEVER use the machine with the weight stack
pinned in an elevated position.
8. NEVER use dumbbells or other means to
incrementally increase the weight resistance. Only
use the means provided directly from the
manufacturer.
9. Injuries to health may result from incorrect or
excessive training. Cease exercise if you feel faint
or dizzy. Obtain a medical exam before beginning
an exercise program.
10. Keep body, clothing, hair, and fitness accessories
free and clear of all moving parts.
11. Adjustable stops, where provided, must be used
at all times.
12. When adjusting any adjustable mechanism (stop
position, seat position, pad location, range of
motion limiter, pulley carriage, or any other type),
make certain that the adjustable mechanism is fully
engaged prior to use to prevent unintended motion.
13. Manufacturer recommends that this equipment be
secured to the floor to stabilize and eliminate
rocking or tipping over. Use a licensed contractor.
14. If equipment is NOT secured to floor: NEVER allow
resistance straps, ropes or other means to be
attached to this equipment, as this may result in
serious injury. NEVER use this equipment for
support during stretching, as this may result in
serious injury.
15. DO NOT REMOVE THIS LABEL. REPLACE IF
DAMAGED OR ILLEGIBLE.
ENGLISH
IMPORTANT SAFETY INFORMATION
It is the sole responsibility of the purchaser
of MATRIX products to instruct all individuals,
whether they are the end user or supervising
personnel on proper usage of the equipment.
It is recommended that all users of MATRIX
exercise equipment be informed of the
following information prior to its use.
Do not use any equipment in any way other than as
designed or intended by the manufacturer. It is imperative
that MATRIX equipment be used properly to avoid injury.
INSTALLATION
1. STABLE AND LEVEL SURFACE: MATRIX exercise equipment
must be installed on a stable base and properly leveled.
2. SECURING EQUIPMENT: Manufacturer recommends
that all stationary MATRIX strength equipment
be secured to the floor to stabilize equipment
and eliminate rocking or tipping over. This
must be performed by a licensed contractor.
3. Under no circumstances should you slide equipment
across the floor due to risk of tipping. Use proper
materials handling techniques and equipment
recommended by OSHA.
All anchor points must be able to withstand
750 lbs. (3.3 kN) pull-out force.
MAINTENANCE
1. DO NOT use any equipment that is damaged and or
has worn or broken parts. Use only replacement parts
supplied by your country’s local MATRIX dealer.
2. MAINTAIN LABELS AND NAMEPLATES: Do not
remove labels for any reason. They contain
important information. If unreadable or missing,
contact your MATRIX dealer for a replacement.
3. MAINTAIN ALL EQUIPMENT: Preventative maintenance
is the key to smooth operating equipment as well
as keeping your liability to a minimum. Equipment
needs to be inspected at regular intervals.
4. Ensure that any person(s) making adjustments
or performing maintenance or repair of any
kind is qualified to do so. MATRIX dealers will
provide service and maintenance training at
our corporate facility upon request.
ADDITIONAL NOTES
This equipment should only be used in supervised areas
where access and control is specifically regulated by the
owner. It is up to the owner to determine who is allowed
access to this training equipment. The owner should
consider a user’s: degree of reliability, age, experience, etc.
This training equipment meets industry standards for
stability when used for its intended purpose in accordance
with the instructions provided by the manufacturer.
This equipment is for indoor use only. This training equipment
is a Class S product (designed for use in a commercial
environment such as a fitness facility). This training equipment
is in compliance with EN ISO 20957-1 and EN 957-2.
This equipment has been designed for medical/therapeutic
use when used under the supervision of a doctor or clinician.
NOTE
1. Ambient temperature for operating this equipment is 5°C
- 40°C (with NO air-flow), nominal 25°C.
2. Relative Humidity for operating this equipment is 10% -
90% (non-condensing), nominal 40% (non-condensing).
3. Ambient temperature for shipping and storage this
equipment is from -20°C to 70°C (with NO air-flow).
4. The barometric pressure for operating/storage/
transportation of this equipment should be between
70kPa~106kPa.
5. Relative Humidity for shipping/storage is 10% - 90% (non-
condensing).
6. Please dispose of the scrap according to local laws and
regulations.
- Operating Instructions
- Manufacturer
JOHNSON INDUSTRIES (SHANGHAI) CO., LTD.
No.4500, Baoqian Rd, Zhuqiao,
Jiading, Shanghai, China