6
CHAPTER 3: A
djusting
t
he
s
eat
/ m
anager
m
ode
3.1 RECUMBENT SEAT HEIGHT
To adjust the seat height on the Recumbent Cycle, locate the yellow lever
under the right side of the seat before you mount the Cycle. Place your right
hand on the orange adjustment handle under the right side of the seat. Place
feet on the ground while seated and slide forward if needed. Place feet on
pedals, gently lift lever under the right side of the seat. Using legs, slowly
push and slide the seat up or down to desired position. Release lever and
allow to lock into place.
3.2 UPRIGHT SEAT HEIGHT
To adjust the seat height on the Upright Cycle, locate the orange pull pin
before you mount the Cycle. To raise or lower the seat, pull the orange knob
while holding the seat with the other hand and slide up or down accordingly.
Make sure you are not seated when you pull the knob or pull the seat up.
3.3 HYBRID SEAT HEIGHT
To adjust the seat height on the Hybrid Cycle, pull the orange lever under the
seat and lower the seat to the lowest position, stand over the seat and grab
the orange lever. Pull the lever and lift until the seat base makes contact
with your pelvic bone.
3.4 USING MANAGER PREFERENCE MODE
This section allows a user to manipulate default settings for the machines. It
may be accessed by pressing the Level Up/Level Down simultaneously for 5
seconds. To change a setting, press “Enter” on the keypad and use the Level
buttons and numeric keypad to change the values. Pressing “Enter” again
will save the change. Pressing “Back” will bring you to the previous menu.
To exit manager’s mode, hold “Stop” down for 5 seconds. Below is a list of
the settings.
Maximum Time
Default Time
Default Level
Default Age
Default Weight
Accumulated Distance
Accumulated Time
Software Version
Timer Mode
Speed/Distance Mode
Out of Order
Gender
Language
Sound Mode
Premium_cycle_090326.indd 6
3/26/09 9:35 AM