Matrix E3X-01, Руководство по обслуживанию

Страница: 43 / 66

39
8.17 pEdal arM rEplacEMEnt
1) Remove the plastic cover where the dual action handlebar meets the pedal arm (Figure A).
2) Remove the bolt and bushings where the dual action handlebar and the pedal arm meet (Figure B). NOTE: Be sure to move the bushings
from the old pedal arm to the new one (Figure C).
3) Remove the pedal as outlined in Section 8.16.
4) Remove the 3 bolts that hold on the mounting plate at the crank arm / pedal arm joint (Figure D). Note the plastic washer that mounts at the
end of the shaft (Figure E).
5) Slide the pedal arm shaft out of the crank arm housing (Figure F) noting the order of the washers on the pedal arm shaft (Figure G).
6) Reverse Steps 1-5 to install a new pedal arm.
7) Test the Elliptical Trainer for function as outlined in Section 8.21.
cHaptEr 8: part rEplacEMEnt gUidE
figUrE a figUrE b
figUrE c