background image

2

Thank you for purchasing the Matrix Duo.  Please read through this instruction booklet carefully and keep it safe in 

case needed for future reference.

Contents

Safety Precautions

Do not use the machine if the power cord is damaged in anyway.  Do not use a power supply 

that is not in accordance with the rated voltage.

Do not try to disassemble, modify or repair the machine yourself.  If you encounter a problem you

must call a qualified engineer.

Keep long hair, loose clothing and items such as ties and jewellery away from the rollers of the  

machine at all times to avoid danger of entanglement.  If entanglement occurs, press the REVERSE  

button or cut off the power immediately.

Keep water and liquids away from the machine at all times.  Do not operate the machine with wet 

hands.  Do not cut off the power to the machine whilst in operation (except if entanglement occurs).  

Use the safety guard at all times. 

The Matrix Duo works at a high temperature, therefore ensure you do not touch the rollers or any 

part of the machine which states ‘HOT’ or ‘CAUTION’ whilst it is in operation.  Do not cover the 

machine if it is still cooling down.  Do not laminate any material other than what is stated in this 

manual and do not use any lamination film other than what is recommended for this system.

Operate the machine in a well ventilated, clean, dry place with a large enough working space at the front and rear 

of the machine.  

Ensure the power cable is not dragging on the floor or causing a hazard to operators.

For producing the top quality results that this machine is designed to do, you must use high quality lamination 

film.  Pro life film is the suggested brand by the manufacturer.

Further advice

Page 2 - Safety precautions
Page 3 - Machine parts and stand (options extra) assembly
Page 4 - Control panel and functions of digital display
Page 5 - Operating instructions
Page  6-8 - Loading/threading the film
Page 9 - Cleaning and maintenance
Page 9 - Troubleshooting
Page 9 - Specification chart
Page 10 - Warranty and incorrect use

WARNING

NO DISJOINT

ENTANGLEMENT 

CAUTION

ELECTRIC SHOCK 

CAUTION

HIGH 

TEMPERATURE 

CAUTION

Содержание Duo MD-460











Отзывы: