Matrix COSEC Panel, Быстрый старт, Страница: 18 / 24

12 Matrix PANEL Quick Start
• Set the IP address of the COSEC application server as "192.168.50.x"
where "x" can be any number from 2 to 254.
• Keep the Subnet mask "255.255.255.0".
Keep a record of your computer's current network configuration as you will
need to re-instate this configuration once the PANEL's network settings has
been changed.
When configuring the IP addresses of the new COSEC PANEL, please
ensure that you connect the PANELs one at a time on the network. This is to
avoid conflict of IPs which would occur if two PANELs with the same default
IP addresses are connected on the network.
Configure the application server computer's network connection:
• Set the IP address of the COSEC application server as "192.168.50.x"
where "x" can be any number from 2 to 254.
• Keep the Subnet mask "255.255.255.0".
Once the IP address of the PC has been changed, the connectivity with the COSEC
PANEL can be checked by passing the ping command. Go to the Command prompt
and pass the following command:
ping 192.168.50.1
On getting a response from the COSEC PANEL, proceed with the further
configuration of the PANEL.
Connecting to the COSEC Jeeves™ Web Server
Now the user can access the on board COSEC Jeeves web server on the COSEC
PANEL device using a Web Browser.
Open the internet browser of the computer, and enter http://192.168.50.1 (default IP
address of the PANEL) as the target address. Press the Enter key to display the
Matrix COSEC Jeeves login screen.
There are three default User Levels which cannot be edited:
• System Administrator
• System Engineer
• Operator