manualshive.com logo in svg

Matrix Telecom Proton 206, Системное руководство, Страница: 18 / 98

Поделиться
Скачать
Matrix Telecom Proton 206 Скачать руководство пользователя страница 18

18

PROTON 206/308 V1 System Manual

Example:

Station 23 is busy. To enable Auto Call Back, dial 2 during busy tone. If you have wrongly dialed 23 and want to 
cancel Auto Call Back request, dial 102 to cancel it.

Auto Call Back-On No Reply

What’s this?

•

Station user need not keep trying “no-reply” station repeatedly. 

•

Station user can set ACB-No Reply.

•

When the station user for whom ACB request was made returns to his desk and picks up the handset the 
station that requested ACB rings.

•

Both the stations come in speech when the station that requested ACB answers the call.

To Set ACB-on No reply

To Cancel Auto Call Back

How to program?

Please refer 

“Class Of Service (COS)”

 for details on how to allow Auto Call Back to a user.

Important Points:

•

Only one ACB-On Busy request is entertained at a time.

•

Only one ACB-On No Reply request is entertained at a time.

•

The last ACB request supersedes all other previous ACB requests.

•

ACB-On Busy and ACB-On No Reply can be used simultaneously.

Timer of Relevance:
Auto Call Back Ring Timer

-Time for which the station on which the ACB is set rings.

Command : 

217-10-Seconds

Default : 45 seconds.
Valid Range : 01 to 99 seconds

Relevant Topic:

1.

“Class Of Service (COS)”     36

Auto Redial

What’s this?

•

Many times when we make a call, we find that the called party is busy. Hence we have to try the same 
number again and again to contact him. This is very frustrating and time-consuming. Auto Redial rescues us 
from this sheer  wastage of time. The system gives ring to the station user that requested Auto Redial, when 
the call goes through.

•

The PROTON 206/308 offers two types of Auto Redial. Low priority Auto Redial and High priority Auto 
Redial.

•

Generally the system should be programmed in such a manner that in low priority type the number of trials 
made by the system is less (count) and the time gap between two trials (timer) is more whereas in high 
priority type the number of trials is more and the time gap between two trials is less. This enables us to give 
Auto Redial facility to senior officials as well as staff persons.

1 Dial 

Number.

Busy tone

2 Dial 

Flash-2.

Confirmation tone

1 Dial 

Number.

Busy tone

2 Dial 

102.

Confirmation tone

Содержание Proton 206



































































































Отзывы:

Нет отзывов