Matrix Switch Corporation MSC-XDM1000S Скачать руководство пользователя | Manualshive

Страница: 12 / 64

background image

MSC-XDM1000S Product Manual

LED Label Description

PS 1

Power supply 1 good indicator.

PS 2

Power supply 2 good indicator.

FAULT

Red LED for user configurable faults.

Table 3: Status Panel Indicators

This model is not equipped with a built-in button control panel, however several options are available for
controlling the device, including the web page interface, telnet, RS-232 serial and remote control panels.

1.5 Web Page Interface

All Matrix Switch Corporation router and panel devices come with a built-in web page interface.
This is the recommended interface for configuration and is also a convenient way to control the matrix routing
of the device.
Devices come factory configured with default settings, unless a pre-configuration request is made during
purchase, an example being a multi device application.

1.5.1 Accessing The Web Page Interface

The default network IP address for this device is 192.168.2.60. Refer to the table below for the default IP
addresses for other types of Matrix Switch Corporation devices.

Device Type

Default IP Address

Video/Audio Routers

192.168.2.60

Remote Button Panels

192.168.2.64

Remote LCD Screen Panels

192.168.2.80

Table 4: Default System IP Addresses

To access the web page interface of the device:

1. Connect the Ethernet port of a computer either directly to the device using a straight through or

crossover cable to the same Ethernet network through a network switch or other LAN infrastructure.

2. Manually configure the computer's IP address to be a

unique

address on the same IP subnet as the

device. For example 192.168.2.10. The Netmask should be 255.255.255.0. A Gateway address is not
necessary for this purpose, but could be set to 192.168.2.1.

3. Make sure the device is powered on.
4. Using a web browser on the computer, enter the device's IP address into the Location bar and press

ENTER. The device web page interface should load. If the web page interface fails to load, double
check the computer's network settings and physical Ethernet connections. In the event that the IP
address of the device is unknown, refer to the

Unknown IP Address

troubleshooting section.

1.5.2 Network Settings

Network settings can be changed on the Config tab of the Web Page Interface. This includes DHCP enable, IP

Page 12 of 64

© 2013-2018 Matrix Switch Corporation

www.matrixswitch

«
...
10
11
12
13
14
...
»

Содержание MSC-XDM1000S

































































Отзывы:

Нет отзывов

Похожие инструкции для MSC-XDM1000S

WJSX150 - SWITCHER - ADDENDUM

Бренд: Panasonic Страницы: 48

TNS5500D Series

Бренд: 3onedata Страницы: 5

IPS7112G-4GS-8GPOE

Бренд: 3onedata Страницы: 3

Бренд: H3C Страницы: 22

S5500-EI series

Бренд: H3C Страницы: 2

dominion kx III

Бренд: Raritan Страницы: 6

Бренд: Raritan Страницы: 5

DOMINION KSX II

Бренд: Raritan Страницы: 7

Бренд: Raritan Страницы: 2

Бренд: WAGO Страницы: 39

Бренд: ATEN Страницы: 17

Бренд: EtherWAN Страницы: 2

Бренд: EtherWAN Страницы: 2

Бренд: enbrighten Страницы: 2

Бренд: Unipoe Страницы: 9

Бренд: Cabletron Systems Страницы: 116

Бренд: J-Tech Digital Страницы: 13

Бренд: Linksys Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды