Matrix Fitness C5X-01 Скачать руководство пользователя страница 10

Страница: 10 / 73

3.2 CARE AND MAINTENANCE INSTRUCTION

In order to maximize life span, and minimize down time, all MATRIX equipment requires regular cleaning, and maintenance items performed on

a scheduled basis. This section contains detailed instructions on how to perform these items, the frequency of which they should be done, and a

check list to sign off each time service is completed for a specific machine. Some basic tools and supplies will be necessary to perform these tasks

which include (but may not be limited to):

* Metric Allen wrenches

* #2 Phillips head screwdriver

* Adjustable wrench

* Torque wrench (capability to read foot lbs, and inch lbs)

* Lint free cleaning cloths

* Teflon based spray lubricant

* Mild, water soluble, detergent – such as “Simple Green”, or other Matrix approved product

* Teflon based spray lubricant such as “Super Lube”, or other Matrix approved product

* Vacuum cleaner with an extendable hose and crevasse tool attachment

You may periodically see addendums to this document, as the Matrix Technical Support Team identifies items that require specific attention, the

latest version will always be available on the Matrix website,

www.matrixfitness.com

DAILY MAINTENANCE ITEMS

1) Clean the entire machine using water and mild detergent such as “Simple Green”, or other Matrix approved solutions (cleaning agents should

be alcohol and ammonia free).

NOTE:

Never spray cleaner directly onto the equipment, spray cleaner onto a cloth and then wipe the

equipment.

QUARTERLY MAINTENANCE ITEMS

1) Check all connecting joint areas for tightness of bolt assemblies.

2) Remove the maintenance cover and check the fans for function.

3) Remove the maintenance cover and check the chain for damage, alignment and proper tension.

YEARLY MAINTENANCE ITEMS

1) Remove the maintenance covers and check the belts for damage, alignment, and proper tension.

2) Remove the maintenance covers and check the brake for function.

CHAPTER 3: PREVENTATIVE MAINTENANCE

Содержание C5X-01










































































Результаты поиска

Содержание C5X-01

Отзывы:

Похожие инструкции для C5X-01

Бренды по названию

Популярные бренды

Matrix Fitness C5X-01, Руководство по обслуживанию

Результаты поиска

Содержание C5X-01

Отзывы:

Похожие инструкции для C5X-01

Бренды по названию

Популярные бренды