Operator's Manual
multipli 35
Buckle Fold Unit 35/2 and 35/4
40
Mathias Bäuerle GmbH
Setting the Fold
Plate Stops
•
Loosen the fold plate stop by turning the knurled screw counter-clockwise (1).
•
Set the stop to the required position on the scale (2).
•
Secure the fold plate stop by turn-
ing the knurled screw clockwise.
•
By turning a fine adjustment
screw (3), the fold length can
be adjusted precisely with the
machine running
•
Angle corrections for the paper
stop are possible by turning the
knurled screw (4).
1
2
3
4
The type of fold determines the position of the fold plates and of the deflec-
tors. The original format determines the fold lengths to be set.
The fold length is the distance between the fold plate stop and the fold line.
Long Fold Plate
LFT 35
A special fold plate (order no. 5.500.249) is available for longer formats.
It is used when the first fold needs to be longer than 360 mm.
The maximum fold length is 430 mm.
Setting Guide for
Common Types of
Fold
On the following pages you will find a few examples on which fold plates and
deflectors to use and how to set them:
Sheet length
Leading edge
Fold length in fold
plate 1:
2/3 of sheet length
Fold length in fold
plate 2
1/3 of sheet length
1 =
2/3
2 =
1/3
Example:
Letter fold
www.WhitakerBrothers.com
