Model No. BI-1000T
June 2011
Page
7
/
9
How to set-up,
Place induction server on adapter,
Place the control panel on the pocket,
Place chafing dish on the glass-top,
Push on/off button to activate,
Push "High" button to select higher temperature setting,
The unit will flash "H1" to explain it's set-up at H1 level.
If the temperature isn't high enough,
Please push "High" button again to select higher temperature,
The unit will flash "H2" to explain it's set-up at 'very high' level.
Please push "High" button again to select higher temperature,
The unit will flash "H3" to explain it's set-up at 'maximum' level.
Push "Low" button to select low temperature setting,
The unit will flash "L2" to explain it's set-up at L2 level.
If the temperature isn't low enough,
Please push "Low" button again to select lower temperature,
The unit will flash "L1" to explain it's set-up at 'very low' level.
Temperature-level Display,
If the display flash quickly (every 0.5second),
It means that unit is still try to increase temperature,
If the display flash slowly (every 3seconds),
It means the unit is reaching the desired holding temperature.
