Operation
Page 7
7. Repeat steps 4 – 6 on the second universal joint half.
8. Debur all cut edges. (Picture 4)
9. Grease the profile tubes. (Picture 5)
10. Slide the profile tubes together.
Mounting the universal joint shaft
1. Press the locking pins on the outer forks and keep them depressed.
2. Slide the outer fork onto the profile stub of the PTO shaft.
3. Release the locking pin.
4. Slightly move the universal joint shaft back and forth until the locking pin audibly
locks in place.
5. Hook the safety chain of the universal joint shaft to a fixed part on the tractor and on
the implement.
Depending on the version, the machines are equipped with a hydraulic
swivel device
.
Plug the hydraulic hoses in the hydraulic sockets on the tractor provided for this pur-
pose.
Ensure that the plug-in couplings are clean.
Picture 5
Picture 6
