matev 131 7122 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 23

matev 131 7122 Скачать руководство пользователя страница 5

Safety

Page 5

2.4.

Special safety instructions

Safety instructions are specified in this chapter that are also affixed as stickers on the im-
plements



Attention!
Danger of injury due to moving parts.
Remove the ignition key before performing maintenance tasks on the im-
plement.





Attention!
Injuries can occur due to improper operation. The implement can be dam-
aged.
Read the operating manual all the way through.
Comply with the safety instructions.





Attention!
Injuries due to fluid escaping under high pressure.
Comply with the instructions in the operating manual.



Attention!
There is an increased risk of accident due to the rotating PTO shaft.
Do not enter the work area of the PTO shaft when it is rotating.
For your own safety do not wear any loose clothing, belts, or any other
loose items. Switch off the implement. Wait until all machine parts have
come to a standstill before converting or servicing the implement.

Attention!
Check all threaded unions prior to using the implement and after using the
implement. Loosened connections must be retightened.
Damage can occur due to loose connections.

2.5.

Supplemental provisions



Ensure that the speed and the direction of rotation of the independent live PTO are

suitable for driving the implement before coupling to an implement.



Always switch off the front PTO shaft and wait until the PTO shaft is no longer turn-

ing when you leave the tractor or work on the connected implement.



Do not attempt to find a possible leak in the hydraulic system with your fingers. Oil

under high pressure can easily penetrate skin and clothing and cause serious in-
jury.

«
...
3
4
5
6
7
...
»

Содержание 131 7122
























Отзывы:

Нет отзывов