Matermacc IRRIGAMATIC PRO35, Руководство пользователя

Страница: 14 / 30

IRRIGAMATIC PRO 35
Page 06
3.3.2 ACTIONS DURING THE IRRIGATION
CYCLE
A
Manually change the instantaneous rewinding
speed by means of the BYP valve (following the
manual intervention the console will resume
regulation according the regulation algorithm
around the value entered).
B
Change the rewinding speed set by the current
sector.
C
Interrupt the cycle.
D
Restart the cycle.
3.3.2.1 CHANGING THE INSTANTANEOUS
SPEED
1
Position the focus on by turning the knob,
and press it. The label changes to show
-
REG + .
2
Position the focus on REG + by
turning the knob and press it to reduce the speed,
or on
- REG
and press it to increase
the speed.
3
Position the focus on
- +
by turning
the knob, and press it. The label changes to show
.
During irrigation, the display alternates between:
- rewind speed
- hose to be gathered (morft)
- estimated end of work
To stop this rotation, place the cursor on the
alternating sizes. The display stops at the current one.
To change the size displayed, press the knob.
During irrigation, it is possible to:
MAN
-
+
REG
MAN
3.3.2.3 INTERRUPTING/RESTARTING A
CYCLE
1
Interrupting: during a cycle, position the focus
on
STOP
by turning the knob, and press it. The
label changes to show
RUN
: the console
commands the valves to suspend the cycle:
A
closing/opening the
FLUX
valve
(depending on whether it is in inflow or
outflow phase).
B
opening the BYP valve to set speed to zero.
2
Restarting: when a cycle is suspended, position
the focus on
RUN by turning the knob, and press
it. The label changes to show STOP : the
console commands the valves to restart the
cycle:
A
opening/closing the FLUX valve
(depending on whether it is in inflow or
outflow phase).
B
activating the
BYP
valve to regulate the
return speed.
3.3.2.2 CHANGING THE REWINDINGSPEED
FOR THE CURRENT SECTOR
1
2
Place the cursor on , rotate the knob
and then press it for at least 5s. The label
changes and reads
.
Rotate the knob to the right or left and then press
it for at least 5s to confirm the value set.
V 35 m/h
35* m/h