Adjust the regulator for the appropriate job.
Left - Low (2,000 RPM) for pinstripe removal
- STEP 1 -
- STEP 2 -
Once the decal and adhesive is removed, apply wax.
- STEP 3 -
Thoroughly wipe the surface to remove any residue.
- STEP 4 -
Page 3
SUGGESTED AIR LINE CONNECTION
HOW TO USE THE TOOL
Pitch pipe back toward air receiver
Compressor Unit
Drain
Daily
25 FEET OR MORE
Oil and Water Extractor should be at least 25 ft. from the compressor. Further if possible.
Drain
Daily
Drain
Daily
Oil and Water
Extractor
Install drain at
each low point
PIPE SIZE, I.D. (Inches)
Air Flow
CFM
Length of Pipe (feet)
10
20
30
40
50
70
50
1/2"
3/4"
3/4"
1"
1"
1"
100
3/4"
3/4"
3/4"
1"
1"
1"
150
3/4"
3/4"
1"
1"
1"
1-1/4"
200
3/4"
1"
1"
1"
1-1/4"
Right – High (4,000 RPM) for decal and
double-sided tape removal
Using the MT1425EP Eraser Pad, set to the appropriate speed for
the job.
Apply flat to surface (90° to surface)
if removing pinstripes, adhesive,
double-sided tape and moldings.
Using pad at an angle is not
recommended and may cause
property damage.
MT1425K
ADHESIVE REMOVAL
SYSTEM
MT1425K
1504059-14
