8
1812411-11
Using the Barcode Scanner
You may use the barcode scanner to scan the VIN attached to the vehicle (or any other barcode), the scanned
number will be entered in the Barcode Data Window (see Fig.14). Then press key to confirm.
Note: If you do not input any particulars and then press key to continue, the test results will not
save in its memory.
To Continue or Repeat Test
Select:
Selecting this function allows user to continue or repeat the last test and not need to key-in (type) the particulars
again on the same car from where the last test was conducted and it will update the results.
For example:
If you had done Battery Test and later wished to perform Alternator Test or Grounding Test on the same car,
just select this function and it will update the results after each test in its memory and it can be retrieved for
review later or to be printed out.
View Test Results from the Memory
Select:
This lets the user view all the test results stored in its memory. Once entered, the display will show (Fig.15) as
below showing all the particulars that were keyed-in (typed) during the test. Press
key to scroll upwards and
key to scroll downwards to select. During scrolling the highlight bar will move up or down on the required
particulars.
Press
or
key to move forward or backward to the next page. Once confirmed, press to view the results:
Examples:
Delete Individual Result from the Memory
Select:
Fig.17
Fig.16
Fig.15
8
367061WS2337E
SZC3466MZ
MR. KINGSLEY
CAL2115EM
12.65 V
[560 CCA]
480 CCA
8.65 m
79 %
20.58 m
