PAGE 2 OF 3 | AU SUPPORT 1800 237 425 WWW.MATCHMASTER.COM.AU | NZ SUPPORT 0800 237 425 WWW.MATCHMASTER.CO.NZ
No.
Name
Description
1
OUT1~OUT3
Three RJ45 jacks with PoC support.
Connect to receivers over CAT5e/6
cables.
2
OUT4
HDMI loop output for connecting
display.
3
SOURCE
HDMI input port for connecting
source.
4
IR IN
A 3.5mm jack for connecting the
included IR receiver.
5
IR OUT
A 3.5mm jack for connecting the
included IR emitter.
6
DC 12V
DC barrel connector for AC power
adapter.
No.
Name
Description
1
CAT IN
RJ45 jacks with Green and Yellow
indicators. Connect to Splitter over
CAT5e/6 cable.
2
IR IN
A 3.5mm jack for connecting the
included IR receiver.
3
IR OUT
A 3.5mm jack for connecting the
included IR emitter.
4
SYNC
We recommend to press the SYNC
button after you have finished
connecting the units to ensure the
best image.
5
HDMI OUT
HDMI output for connecting display.
Receiver Front & Rear Panel
Controlling the Display Device
HDMI 1x4 Splitter
Controlling the Source Device
CAT IN
IR IN
IR OUT
HDMI OUT
1
2
3
4
5
SYSTEM DIAGRAM
EDID MANAGEMENT
SPECIFICATION
IR CONTROL
DVD
1080P 60M
Receiver
PoC
IR:
Catx:
HDM:
Power:
Display
IR Receiver
IR Receiver
IR Emitter
IR Emitter
DVD
DVD Remote
1080P 60M
Receiver
PoC
IR:
Catx:
HDM:
Power:
Projector
Display
IR Receiver
IR Emitter
DVD
1080P 60M
Receiver
PoC
IR:
Catx:
HDM:
Power:
Display
IR Receiver
IR Emitter
The Extended Display Identification Data (EDID) is used by
the source device to match its video resolution with that of
the connected display. By default, the source device obtains
its EDID from the first connected display. However, since
displays with different capabilities can be connected to the
splitter, the EDID DIP switch can be used to set the EDID to
a fixed value.
It provides IR control of remote devices by connecting an
IR receiver and transmitter to the system. The IR feature
is bidirectional, so either the source or display device(s)
can be controlled. Use the following sample connection
diagrams to connect for IR remote control.
Switch Status
EDID
DEFAULT
Preserved for customization, default
1080p.
720p
Set the EDID to distribute 720p video.
1080P
Set the EDID to distribute 1080p video.
Video Input
Input
(1) HDMI
Input Connector
(1) female type A HDMI 1.4
Video Output
Output
(3) OUT(1~3); (1) HDMI(OUT 4)
Output Connector
(3) RJ45 jacks; (1) female type A
HDMI 1.4
Video General
Maximum Video
Resolution
1080p@60Hz
Maximum
Transmission
Distance
Up to 164 feet (50 meters)
via CAT6;
Up to 147 feet (45 meters)
via CAT5e
HDMI Standard
1.4 with HDCP1.4
Projector
Projector
