Matchmaster 05MM-RE03, Руководство пользователя

Страница: 13 / 16

Recharging Battery
Your RF transmitter is installed with small recharging battery
(2/3 AAA size) and the performance of the extender
deteriorates (the LEDs do not blink when you press the remote
button), you need to recharge (replace) the battery.
1. Remove the RF transmitter from your remote control and
take rechargeable battery out.
2. Find the recharging pocket on the bottom of receiver. There
should be an extra battery, fully charged already in the pocket.
3. Install fully-charged battery in transmitter and insert old
battery onto the 2/3 AAA pocket for recharging. Close the
cover. While the battery is recharging, the LED CHG (BAT) will
blink in the receiver. LED will blink when the recharging battery
is inserted in the pocket. Full recharging time is approx. 12 hours
and 6-8 hours when the battery is not fully flat.
After replacement of rechargeable battery, you need to test
the function. If you feel it has working problem, replace normal
battery (AA or AAA) with new one.
Caution
1. Do not use a normal battery in recharging pocket.
2. Only use a rechargeable battery.
Care
Keep the extender dry, if it gets wet, wipe it dry immediately.
Use and store the extender only in normal temperature
environments. Handle the extender carefully and do not drop it.
Keep the extender away from dust and dirt, and wipe it with a
damp cloth occasionally to keep it looking new.