ETC Report No. : 16-09-RBF-027
Sheet 7
of 36 Sheets
FCC ID:
2AC96WDP
7
3. SYSTEM TEST CONFIGURATION
3.1 Justification
For both radiated and conducted emissions, the system was configured for testing in a typical
fashion as a customer would normally use it. The peripherals other than EUT were connected
in normally standing by situation.
All measurement were intentional to maximum the emissions from EUT by varying the
connection cables(if applicable), therefore, the test result is sure to meet the applicable
requirement.
For portable device, the EUT was pretested in three orthogonal plans: put on table
horizontally, stands vertically and side up vertically. The worst case was chosen for final test.
3.2 Devices for Tested System
Device
Manufacturer
Model / FCC ID
Description
Wireless Display *
MATATAKITOYO
TOOL Co., Ltd.
WTT-1301 / 2AC96WDP
----
Remark “*” means equipment under test.
