Mounting
Locations
for
RT
‐
WGA
Damper
Drive
shaft
to
extend
beyond
standoff
bracket
at
least
1"
For Dampers Supplied by Others
Страница 1: ...on and at 3 foot intervals Use retaining clips furnished by MAT NO DRAPING cables should be taut or nearly so 4 minimum turn radius Clips should be installed with a loose fit to allow cable rotation The longer the cable and the larger the damper the more attention should be paid to cable support For longer cable runs e g 30 ft it may be more convenient to support the cable in a conduit rather than...
Страница 2: ...Mounting Locations for RT WGA Damper Drive Damper shaft to extend beyond standoff bracket at least 1 RT WGA Damper Drive For Dampers Supplied by Others ...
Страница 3: ...ld with a square cable end MAT s Standard Coupling P N MAT 1027 is used to couple two square cable ends MAT s Field Cut Cable End P N MAT 1048 is used to create a square tip on a cable that has been cut shortened in the field Square Opening Square Opening Square Opening Round Opening Set Screws Note To avoid fraying an abrasive cutting method should be used to shorten cable in the field Round Cut ...
