MAT Industries 40CF16 Скачать руководство пользователя страница 3

3

Speedaire Operating Instructions

E

N

G

L

I

S

H

Description

This manual contains information that is important for you to know and understand. This information relates to protecting YOUR 

SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the symbols below. Please read 

the manual and pay attention to these symbols.

Safety Symbols

Indicates an imminently 

hazardous situation which, if not avoided, 
will result in death or serious injury.

Indicates a potentially 

hazardous situation which, if not avoided, 
could result in death or serious injury.

Indicates a potentially 

hazardous situation which, if not avoided, 
MAY result in minor or moderate injury.

Indicates important 

information, that if not followed, may 
cause damage to equipment.

Unpacking

After unpacking the unit, inspect carefully for 
any damage that may have
occurred during transit. Make sure to
tighten fittings, bolts, etc., before
putting unit into service.

Do not operate unit if damaged during 
shipping, handling or use.
Damage may result in bursting and
cause injury or property damage.

General Safety Information

CALIFORNIA PROPOSITION 65 
WARNING: 

This product contains 

chemicals known to the State of 

California to cause cancer, birth defects 

and/or reproductive harm.

This product contains 

chemicals known to the State of California 
to cause cancer, and birth defects or other 
reproductive harm. Wash hands after 
handling.

Some dust contains 

chemicals known to the State of California 
to cause cancer, birth defects or other 
reproductive harm such as asbestos and 
lead in lead based paint

 To reduce 

the risk of injury, read the 
instruction manual.

GENERAL SAFETY

Since the air compressor and other 
components (material pump, spray guns, 
filters, lubricators, hoses, etc.) used, make 
up a high pressure pumping system, the 
following safety precautions must be 
observed at all times:
1.  Read all manuals included with this  

 

  product carefully. Be thoroughly familiar  
  with the controls and the proper use of the  
 equipment.
2.  Follow all local electrical and safety  

 

  codes as well as the United    

 

  States National Electrical Codes  

 

  (NEC) and Occupational Safety and Health  
  Act (OSHA). 
3.  Only persons well acquainted with these  
  rules of safe operation should be allowed  
  to use the compressor.
4.  Keep visitors away and NEVER allow    
  children in the work area.
5.  Wear safety glasses and use hearing    
  protection when operating the unit.
6.  Do not stand on or use the unit as a    
 handhold.
7.   Before each use, inspect compressed air  
  system and electrical components  

 

  for signs of damage, deterioration,  

 

  weakness or leakage Repair or replace   
  defective items before using.
8.  Check all fasteners at frequent intervals  
  for proper tightness.

Breathable Air Warning

This compressor/pump is NOT

equipped and should NOT be used

“as is” to supply breathing quality

air. For any application of air for

human consumption, you must fit

the air compressor/pump with suitable

in-line safety and alarm equipment.

This additional equipment is

necessary to properly filter and purify

the air to meet minimal specifications

for Grade D breathing as described 

in Compressed Gas Association 

Commodity Specification G 7.1 - 

1966, OSHA 29 CFR 1910. 134, and/

or Canadian Standards Associations 

(CSA).
DISCLAIMER OF WARRANTIES

In the event the compressor is used

for the purpose of breathing air

application and proper in-line safety

and alarm equipment is not 

simultaneously used, existing 

warranties are void, and Dayton 

Electric Mfg. Co. disclaims any liability 

whatsoever for any loss, personal 

injury or damage.

General Safety Rules

Содержание 40CF16















Отзывы: