mastro EFB0007, Руководство по эксплуатации

Страница: 12 / 13

13.
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
8.
Possible Solution.
Fault Possible Solution
A. Switch does not light. 1. Check plug connection to wall socket.
2. Check fuse in plug.
3. Check if hot plate becomes warm, if so
replace switch.
B. Hot plate does not become 1. Check connection to element.
warm although switch (6) is lit. 2. If element defective, replace.
C. Brewer omits excess steam. 1. Machine may require descaling.
2. Spray nozzel may need unblocking.
3. Hose may be bent?
4. Inlet to boiler may be blocked. Descale
machine - if boiler still defective - replace.
D. Machine will not brew. 1. Trip-switch has activated - reset with button.
For possible fault / solution see C.
2. Check microswicth.
3. Check float.
4. Check connection to boiler (10).
5. Boiler unit (10) may need replacing.
F. The machine does not take in 1. Make sure water-inlet is not closed.
water. 2. Make sure the tube is not bent.
3. Check solenoid.
4. Checkthat thelamp in membran switch is blinking.
G. The machines does not stop 1. Dirt in the solenoid.
taking in water.
H. The machine is giving wrong 1. Check watertap.
amount of water. 2. Bent tube.
3. Dirt in solenoid.
4. Membran switch wrongly adjusted. Adjust according to
installation manual.
5. Defective flow regulator in solenoid, shift solenoid.