background image

 

F. Setting and adjustment of temperature 

 

 

Open the access cover on the bottom front of the cabinet 

 

The thermostat is set by the factory at the mid-range point. Turning the knob 
clockwise will cause the cabinet to become colder, and vice-versa. Generally, 
there is no need to adjust the cabinet temperature from its factory setting 

 

Please note the cabinet has a defrost timer preset for several times per day to 
prevent ice build-up in the evaporator coil 

 
 

G. General operation 

 

1.

 

Condensate Drain Tray 

 

This tray collects the condensed water vapor from the humidity that ingresses 
the cabinet’s interior by opening the cabinet door. Therefore, the higher the 
humidity in which the cabinet is placed, the more frequent the tray will need 
emptying. Similarly, the more frequently the door is opened, the greater the 
build up of condensate 

 

2.

 

Door 

 

Ensure the door is properly closed at all times. If not, the evaporator coil will 
build up with ice and your cabinet will not function correctly. Try to educate 
your customer to make a choice before opening the door, rather than holding 
the door open whilst making a choice. This will also assist in the cabinet 
maintaining the correct temperature 

 

3.

 

Air Circulation 

 

Internally - when loading your cabinet, allow sufficient room for the air to 
circulate around the cabinet and your product. The more compacted the 
product, the greater the time for your load to cool. Do not impede air flow to 
either the air discharge or air inlet grilles 
Externally – allow 10 cm gap between the cabinet and any wall. Do not build 
the cabinet into a confined space without first considering sufficient air 
circulation for the condenser 

 

H. Maintenance and Cleaning 

 

1.

 

Replacement of the internal light globe 

 

Disconnect from power source. 

 

Grip the colored light base tightly and twist in a clockwise direction 

 

Remove and replace the globe 

 

Re-secure the light housing 

 

4

Содержание BSF-170








Отзывы: