D. Transportation and Placement
1.
Care required during transportation or movement of the unit
•
Once unplugged from the power source, the unit should not be re-started for at
least 10 minutes
•
To prevent possible compressor damage, the cabinet should not be tilted at an
angle greater than 45 degrees
•
If the cabinet has been tilted greater than 45 degrees, stand upright for at least 1
hour before re-starting
•
Take good care of the glass panels to prevent breakage
2.
Unpacking
•
Carefully remove packaging and place the cabinet on a firm and level surface
3.
Keep away from heat
•
Keep the unit out of the direct sun or other heat source to ensure correct
temperatures are achieved
4.
Keep away from moisture
•
The unit should never be placed where rain or water could impinge on it. Very
high humidity may also affect the performance
5.
Good ventilation
•
The space between the cabinet and any wall should be at least 10 cm. Do not
place stickers or the like over any part of the lower grilles, otherwise the unit will
not achieve the correct temperature. Similarly, take care when deciding a position
for the cabinet that other refrigeration equipment or similar is not blowing hot air
at the unit.
E. Safety
•
The cabinet should ideally be connected to a separate electrical, 10 amp circuit
with its own circuit breaker or fuse
•
Do not use “double adapters” or similar devices which allow numbers of electrical
appliances to be operated from on electrical outlet
•
Ensure that no damage has been done to the electrical power lead or plug during
transportation
•
Do not use water sprays or aerosol can sprays to clean the cabinet
•
Should the cabinet be disconnected from its power source, do not attempt to re-
start for at least 10 minutes
•
Do not place objects on top of the cabinet
3
