www.masterweld.co.uk
9.0 EC Declaration of Conformity
Hereby we declare that the machines as stated below
Type: MasterWeld M-400S Pulse-Expert
MasterWeld M-500S Pulse-Expert
MasterWeld M-600S Pulse-Expert
Conform to the EC Directives:
Low Voltage Directive 2014/35/EEC
EMC Directive 2014/35/EEC
Harmonised European standard: EN/IEC 60974-1
This is to certify that the tested sample is in conformity with all provisions of the above detailed EU directives and product standards.
9.1 RoHS Compliance Declaration
Directive 2011/65/EU of the European Parliament
Amended 2015/863 and 2017/2102
Restriction of use of certain hazardous substances in electrical and electronic equipment
Type: MasterWeld M-400S Pulse-Expert
MasterWeld M-500S Pulse-Expert
MasterWeld M-600S Pulse-Expert
The above listed products are certified to be compliant with the RoHS directive with all homogeneous component parts being controlled
to ensure material contents as per the list below.
Cadmium 0.01% by weight
Lead 0.1% by weight
Mercury 0.1% by weight
Hexavalent chromium 0.1% by weight
Polybrominated biphenyl’s (pbbs) 0.1% by weight
Polybrominated diphenyl ethers (pbdes) 0.1% by weight
It should be noted that under specific exempted applications, where lead is used as an alloying element the following limits are applied
in accordance with the regulations.
Copper and copper alloy parts use less than 4% by weight of each homogeneous component.
Steel and steel alloy parts use less than 4% by weight of each homogeneous component.
Aluminium and aluminium alloy parts use less than 4% by weight of each homogeneous component.
24
