MW8002
Rev 00.00
Page 14 of
25
©| AES Industrial Supplies Ltd | 2019 all rights reserved
Unauthorized reproduction of this manual is prohibited
.
MW8002 Welding Fume Extractor
Par
Description
3
Construction features
The portable cleaner adopts mechanical filtration system to purify the air. The air is sucked in through the
nozzle, positioned near the pollutant source and connected to the purifier by means of flexible tubing, through
the filtration section in which occurs the separation of the particulates (dust present in welding). After this first
stage of separation, the air passes through the fan first and then pass through a panel with activated carbon
for deodorization.
-
MW8002
,
with filter section comprising a filter paper in high efficiency ø = 280 mm L = 390 mm, from
an absolute filter ø = 180 mm L = 375 mm and an active carbon filter 225x265 mm. The suction is
obtained by two motors in parallel, individually operated, only one or both simultaneously. is also used
as a scavenger to be applied to the welding torches low amperage provided apparatus for the
aspiration of fumes.
Carchteristics
MW8002
ON OFF switch
YES
Complete control panel YES
Automatic start device
Optional
Activated carbons filter 210 x 210 mm
-
Activated carbons filter 225 x 265 mm
YES
Paper filter Ø=195 L=285 mm
-
Paper filter Ø=280 L=390 mm
YES
Absolute filter Ø=180 L=375 mm
YES
Flexible hose Ø=50 mm L=3 m
YES
Conical extraction nozzle
YES
Magnet for the hood
YES
Extracting torch
-