Mastervolt Mass Sine Ultra 24/4000, Руководство пользователя и инструкция по установке, Страница: 22 / 27

EN / Mass Sine Ultra
22
6.2.1 MasterBus alarms
This is the Mass Sine Ultra list of MasterBus alarms with their meaning.
Alarm Description
Overload Mass Sine Ultra in overload. The loads exceed the nominal inverter power.
Over temperature Internal temperature of the Mass Sine Ultra is too high.
Battery low Battery voltage is too low.
Battery high Battery voltage is too high.
Sync. error Two or more Mass Sine Ultra’s in a multiple configuration do not synchronize well.
Config error Configuration error, most often in multi inverter installations. Check MasterBus and DIP switch settings.
Install error Installation error around the Mass Sine Ultra, not inside the unit. Check all connections.
System error Internal Mass Sine Ultra error. Contact your Mastervolt supplier.
6.2.2 List of event sources
This is the Mass Sine Ultra list of event sources. These can initiate an event at another MasterBus connected device.
Event source Description
Disabled (no event programmed)
Inverting The Mass Sine Ultra is in Inverter mode
Overload The inverter current is too large
Low bat The main battery voltage has dropped below the Low bat value
Alarm A Mass Sine Ultra alarm has been triggered
External fan Trigger point to activate an external cooling fan
6.2.3 List of event commands
This is the Mass Sine Ultra event commands list. Other MasterBus connected devices can be configured to initiate these
commands.
Event command Description
Inverter On/Off Change the Mass Sine Ultra inverter state to On/Off