Mastervolt Mac Plus 12/24-30, Руководство пользователя и инструкция по установке, Страница: 20 / 36

20
MAC-PLUS
Malfunction Possible cause What to do
High ambient
temperature Nothing; if ambient temperature is more
than the setting limit, the charge current is
automatically reduced.
Batteries not fully
charged Charge current too low See “Charge current too low” in this table.
Current to load is too
high Reduce load taken from the batteries.
Charge time too short Use a battery charger with higher capacity.
Battery temperature too
low
Use the battery temperature sensor.
Defective or old battery Check battery and replace if necessary.
Wrong setting of the
charge voltage
Check settings
Batteries are
discharged too fast Battery capacity reduced
due to wastage or
sulphation, stagnation Charge and recharge a few times, this
might help.
Check battery and replace if necessary.
Batteries are too
warm, gassing Defective battery (short
circuit in cell) Check battery and replace if necessary.
Battery temperature too
high Use the battery temperature sensor.
Charge voltage too high Check settings
Slow or no
MasterBus
communication. Error in the MasterBus
wiring. Check the MasterBus cables.
No terminating device
placed at the ends of the
network. MasterBus needs a terminating device on
both ends of the network. Check if
connected.
MasterBus network is
configured as a ring
network. Ring networks are not allowed. Check the
connections of the network.