29
EN / CZone Touch 10 User Guide
3.2.4.3
Dipswitch
To change Touch 10
’s dipswitch and various other parameters, on the Settings home-page first click System:
A
If the displayed dipswitch setting is not already assigned to a module, Available appears in green.
If the setting is not available, the name
of its ‘owner’ module appears instead:
The owner’s name is in red if a conflict would be caused by claiming the dipswitch setting.
This will occur if, for example, the owner has a hardware dipswitch.
The owner’s name is in green if its dipswitch setting could be claimed without causing a
conflict. This will occur if, fo
r example, the owner’s dipswitch can be reassigned in
software.
B
The configured dipswitch setting is displayed. Each switch is on if its digit is 1, or off it is digit is 0.
1
Click Dipswitch on the
Settings
System page.
2
The Dipswitch dialogue appears. Use
the up and down buttons to scroll the
range of dipswitch numbers.
3
To quit at any time,
click the Cancel button.
4
Click the Accept button to
assign the selected dipswitch.
A
B
Содержание CZone Touch 10
Страница 1: ...Touch 10 User Guide v1 0 1 ...
