2
Digital AC 1x6A
– User and installation manual
1. GENERAL INFORMATION
1.1
Use of this manual
This manual serves as a guideline for the safe and
effective operation of the Digital AC 1x6A. Read the
entire manual before using the Digital AC 1x6A. Keep
this manual in a secure place!
1.2
Liability
Mastervolt can accept no liability for:
•
Consequential damage resulting from the use of
the Digital AC 1x6A.
•
Possible errors in the included manual and the
consequences of these.
•
Use that is inconsistent with the purpose of the
product.
1.3
Warranty
The Mastervolt product warranty covers the Digital
AC 1x6A for the first two years after the purchase
date, on the condition that the product is installed and
used according to the instructions in this manual.
Installation or use that do not comply with these in-
structions may result in under performance, damage
or failure of the product and may void this warranty.
The warranty is limited to the cost of repair and/or
replacement of the product. Costs of labor or shipping
are not covered by this warranty.
CAUTION!
Never remove the identification label.
This will void the warranty.
1.4
Disclaimer
Our products are subject to continual development
and improvement. Therefore, additions or modifica-
tions to the products may cause changes to the
technical data and functional specifications. No rights
can be derived from this document. Please consult
our most current Terms & Conditions of Sale.
1.5
Correct disposal of this product
This product is designed and manu-
factured with high quality materials and
components, which can be recycled
and reused. Please be informed about
the local separate collection system for
electrical and electronic products. Please act
according to your local rules and do not dispose of
your old products with your normal household waste.
The correct disposal of your old product will help
prevent potential negative consequences to the
environment and human health.
2. OPERATION
The Digital AC 1x6A operation is entirely MasterBus based. For information about MasterBus and the MasterBus
event structure, see www.mastervolt.com. The following table shows the relay functions.
Monitoring
Description
Factory
settings
Range
State
Relay can be switched On (activate) or
Standby
Standby
Standby/ Activate
Control
Change the state of the relay
Standby
Activate/ Standby
Configuration General
Language
Set the MasterBus Digital AC menu language English
See specifications
Device name
Any name you wish with 12 characters max
AC Relay
1-12 characters
Events locked
Check box for installers to lock event
configuration. Only operable by installers.
Unchecked
Unchecked/
Checked
Shock resistance
(Installer menu)
For applications that experience large shocks
and/or vibration on a regular basis (heavy
duty/racing/etc).
Turn on* will make the relay more 'sticky' and
thus more resilient against shocks/vibrations.
Off
On/Off
Configuration Timing
Min. runtime
Check box to enable the function
Minimum
runtime
for switching the relay.
Unchecked
Unchecked/
Checked
Min. runtime
Minimum runtime setting
15 minutes
1-65535 minutes
Max. runtime
Check box to enable the function
Maximum
runtime
for relay switching the relay.
Unchecked
Unchecked/
Checked
Max. runtime
Maximum runtime setting
480 minutes
1-65535 minutes
* This mode will increase the energy usage of the interface (by about 8mA continuously) as it will keep some power applied to
the relay. This will keep the coil of the relay a little bit magnetized, which in turn will make it more 'sticky' to its current state.
