16
17
model no. 054-0246-8 | contact us 1-800-689-9928
Insert the large end of the hose into the blower
connection in the top of the motor housing.
Turn the motor on by flipping the switch to the
“I” position.
This Wet/Dry Vac has blowing capabilities.
To use the blower feature follow the instructions listed.
Ensure the power switch is turned off and plug
in the power supply.
The unit will now blow through the vacuum
hose and can be used to clear obstructions
within the hose.
WARNING!
If after a few seconds the hose continues to be blocked, turn off the unit and clear the hose manually.
WARNING!
ALWAYS WEAR SAFETY GOGGLES COMPLYING WITH ANSI Z87.1 (OR IN CANADA, CSA Z94.3) BEFORE USING
BLOWER.
KEEP BYSTANDERS CLEAR FROM BLOWING DEBRIS.
WEAR A DUST MASK IF BLOWING CREATES DUST THAT MIGHT BE INHALED.
BLOWER OPERATION
MAINTENANCE
1
1
3
3
2
2
4
4
Disconnect the hose from the container.
Verify that the power cord is disconnected from
the outlet.
Undo the clasps and remove the top section
from the container.
Clear all dirt or debris from the container and
hose.
