10
STAINLESS STEEL WET/DRY VACUUM WITH TWO-STAGE MOTOR 054-0239-6
DR
Y V
ACUUM OPERA
TION
OPERATING INSTRUCTIONS – DRY VACUUMING
BEFORE STARTING
WARNING!
Please read, understand, and apply the safety instructions in Section 1.
Reminder: DO NOT vacuum hazardous substances. The use of an incorrect fi lter will invalidate the
warranty.
1. Ensure that the power cord is disconnected from the outlet (Fig. 1).
2. Ensure that the cartridge fi lter is completely mounted. Ensure that the fi lter is inserted all the way (Fig. 2).
3. In order to increase the operation cycle, please use the cloth pre-fi lter when using for dust cleaning.
This cloth pre-fi lter can prevent fi ne dust from blocking the cartridge fi lter, and prevent damage from
abrasive dust. If cloth pre-fi lter is wet, please dry it before use. Please do not use this cloth pre-fi lter
on both sides (Fig. 3).
4. Replace the top section on the tank, and secure it in place using the clasps (Fig. 4).
5. Insert the larger end of the hose into the front inlet on the tank and lock it in place. Push the required
attachment on to the free end of the hose or extension (Fig. 5).
6. Plug the power cord in to the power outlet (Fig. 6).
7. Turn the motor on by fl ipping the switch to the ‘I’ position (Fig. 7).
8. Once you have fi nished vacuuming, fl ip the switch to the ‘O’ position and unplug the power cord
from the power outlet.
DO NOT use the cartridge fi lter for wet or sharp materials.
O = OFF I = ON
