9
STAINLESS STEEL WET/DRY VACUUM WITH TWO-STAGE MOTOR 054-0239-6
GENERAL ASSEMBL
Y INSTR
UCTIONS
12. Place the power head back on the container, and secure into place using the 2 side latches
(Fig. 12 & 13).
13. Insert the large end of the hose into the front inlet of the tank and turn to lock (Fig. 14).
14. Fit the required accessory on to the suction tube (Fig. 15).
Wheel assembly
1. Place a split pin for fi tting the wheels (F) through the appropriate hole in the axle (B) and fi t a washer
(D) and a wheel (E) to the axle (B) (Fig. 2 & 3).
2. Now slide the axle (B) through the guides provided for it on the underside of the tank (Fig. 4).
3. Fit the second wheel (E) to the empty end of the axle (B) and secure it with the other washer (D) and
the split pin (F) (Fig. 5-7).
4. Push the covers (C) on to the outside of the wheels (E) so that the detents engage on the covers (C) for
the wheel (E) (Fig. 8).
Fitting the casters (Fig. 9)
Fit the casters (A) into the appropriate mountings on the underside of the tank. Push the casters (A) fi rmly
into the mounting until they engage with a clicking noise (Fig. 9).
