MasterTop SkyMaster 158004 Series Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 10

MasterTop SkyMaster 158004 Series Скачать руководство пользователя страница 2

2

Important Safety information

Your MasterTop

®

SkyMaster Top is intended to be used with other MasterTop Products to increase the fair-weather

enjoyment of your off-road capable vehicle. Before installation, please take a moment to review the following safety

information and installation instructions. Important safety information is generally preceded by one of three signal

words indicating the relative risk of injury. The signal words mean:

A hazardous situation which, if not avoided, could result in death or serious injury.
You CAN be KILLED or SERIOUSLY HURT if you don’t follow instructions.

A hazardous situation which, if not avoided, could result in minor or moderate injury.
You CAN be moderately HURT and also may suffer property damage if you don’t follow instructions.

Careful attention is required to this instruction or operation but does generally not relate to personal injury.
Damage to your MasterTop product or other property may result if you don’t follow instructions.

Before you begin Installation:

We are excited that you have chosen the SkyMaster Freedom Top Replacement Kit. This high-quality soft top is de-

signed to provide protection from the elements and a stylish look on your Jeep®. Please note that it is important that

you become familiar with the installation process of this top by reading the following instruction sheet and warnings

thoroughly. When unpacking, carefully check to make sure all parts are included. If any part is missing or broken,

please call MasterTop customer service at 720-575-5440.

Factory Hardware Requirement:

The SkyMaster Freedom Top Soft top is designed to

replace the large, heavy factory Hardtop Freedom

panels with an easy to use soft top that folds back

to create an open-air sunroof.

The unique design of the SkyMaster attaches the side

bows to brackets that are installed on your horizontal

roll bars.

These side tube brackets, once installed can stay on

the vehicle when you remove your SkyMaster Top and

put your Freedom Panels back on the vehicle or if you

want to use other MasterTop Summer accessories.

The installation of these side tube brackets only has

to be done once and you will then have them there

whenever you need them.

SkyMaster Fold Back Sun Roof Concept:

Brackets mounted on the

Horizontal Roll Bar provide the

pivot point for the SkyMaster

fold back sun roof feature

MT_JK_FREEDOM_PANEL_TOP_LTR.qxp_Layout 1 5/8/20 6:51 PM Page 2

«
1
2
3
4
...
»

Содержание SkyMaster 158004 Series











Отзывы:

Нет отзывов