11
Using Your Complete Soft Top Continued
Fully Open Front and Rear Passenger “Sun Roof”:
Option #3 & #4
FIG 71
These options open both the front cab and rear
cab portions of the top. This option requires
you to remove the front header arms and the
two bows from the bow mount brackets. Fig 71
shows the finished look of this “Sun Roof” op
-
tion with the front header installed on the third
bow bracket mount and the header folded all
the way back to the rear of the vehicle.
FIG 73
With the header latches un-latched and front
section open(Fig 71) un-hook the 2 quick release
knobs located on the end of the header arms as
circled in Fig 72. Next, un-hook the 4 quick re-
lease knobs on bow #1 and bow #2 (Fig 72) leav-
ing the two rear bows (Bow #1 & #2) encased in
the hook and loop flaps. Once The front bow arms
and two rear bows are disconnected from the bow
mount brackets, with the help of a friend, carefully
fold back the front header and two bows layering
the top and bows under the fabric and then con-
nect the front bow arms quick release brackets to
the rear-most third bow mount bracket as circled
in Fig 73. This is option # 3. Notice in Fig.74 how
the fabric is “layered back and the front Bow Mount
Brackets are installed to the rear bow brackets.
This is option #4 with the entire fabric assembly
folded back and secured to the rear brackets.
FIG 74
WARNING
The front header arms must be secure to the third bow mount bracket and the fabric/ bows must be layered back
before the vehicle is driven! Failure to secure these bow mounts will cause the top to potentially fly off the vehi
-
cle causing damage to the top, vehicle and potentially other vehicles on the road.
FIG 72