![Masterplug TVRC1N Скачать руководство пользователя страница 9](http://html1.mh-extra.com/html/masterplug/tvrc1n/tvrc1n_operating-instructions-manual_1738874009.webp)
N.B. THE LIGHT INDICATOR STOPS FLASHING.
The remote control exits programming mode and the
light indicator stops flashing:
z
If no buttons are pressed for 15 seconds
z
If a button other than POWER button is
accidentally pressed
z
If the end of the code search list has been
reached. In this case, start again from point 2.
B.2. Mute Searching (TV only)
1. Turn on the TV
2. Press “TV” button and release.
3. Press and hold MUTE button over 5 seconds
and do not release. It will enter the mute
searching.
4. Keep pressing the MUTE button, LED keeps
flashing. When TV shows the mute signal, you
can release the MUTE button. LED will flash
every 3 seconds.
5. If the MUTE signal shows or disappears on your
TV again, press any button to save the code.
LED goes off.
6. You can power on the TV by hand and test the
CH+, CH-, VOL+, VOL-, etc. If the function button
is not working, you may repeat point 2-5.
Note
: If LED flashes 15 times, and then goes off, it
has exited the setup mode, repeat points 2-5.