A.
DIRECT CODE ENTRY
Warning: program one appliance at a time!
1.
Turn on the appliance to be programmed.
2.
Look for the brand of the appliance you want
to program in the code list and make a note
of the first code in the list (e.g. Philips TV
1050 – VCR 5120)
3.
Press and hold the “TV” button for 5 seconds
until LED starts blinking. Then release the
button, LED keeps blinking continuously.
4.
When the LED keeps blinking in step 3,
enter the previously identified code (e.g.
1050) from the code list. If LED flashes 3
times then turns off, it indicated that the code
is accepted. Then press POWER button to
see if it can turn off the appliance. If it can
turn off the appliance, it means the code is
correct; if not, please repeat from step 2 to
try another code.
N.B. THE LIGHT INDICATOR STOPS FLASHING.
The remote control exits programming mode and
the light indicator stops flashing:
z
If no keys are pressed for 15
seconds
z
If an invalid code is entered
z
If the wrong keys are accidentally
pressed.
