MASTERPAC PCR3820 Series, Руководство по эксплуатации

Страница: 18 / 27

17
MAINTENANCE
3.4 Air Cleaner
1. The air filter element should be cleaned because a clogged
air cleaner can cause poor engine starting, lack of power and
shorten engine life substantially.
2. To clean or replace air filter loosen the wing nut on the air
filter housing (Figure 1), remove the cover and take out air
filter cartridge. If only cleaning of the air filter is desired blow
through the air filter cartridge from the inside, moving a jet of
dry compressed air up and down until all dust is removed.
3.5 Spark Plug
Check and clean spark plugs regularly. A fouled, dirty spark plug may cause hard
starting and poor engine performance. Set spark plug gap to recommended clearance.
Refer to engine manual.
The muffler and engine cylinder become very hot during operation and
remain hot for a while after stopping the engine. Allow engine to cool
before removing spark plug.
NOTICE: A loose spark plug can become very hot and may cause engine damage.
3.6 Transport
1. Always shut off engine before transporting the machine.
2. Make sure lifting device has enough capacity to hold machine (see nameplate on
machine for weight).
3. Use lifting point when lifting the machine.
4. NEVER stand underneath the machine while lifting.
5. Trolley wheel as optional is used for short distance transportation.
!
WARNING