MasterForce FlexPower 241-0432, Руководство оператора, Страница: 10 / 20

Page 9
VARIAbLE SPEED TRIGGER
SWITCH (fIG. 2)
Your reciprocating saw is equipped with a
trigger switch to turn the saw on and off and
to control the speed.
1. To start the saw, squeeze the lock-off
button and then depress trigger switch.
2. To stop the saw, release the trigger
switch and allow it to return to the
“OFF” position.
3. To vary the speed, simply increase or
decrease the pressure on the trigger
switch. The more tightly the trigger switch
is squeezed, the higher the speed.
LED WORkLIGHT (fIG. 3 )
FIG. 3
TO ATTACH bATTERy
PACk (fIG. 1)
1. Make sure that the reciprocating saw
is “OFF”
2. Align the raised rib on the battery pack
with the grooves on the bottom of the
saw, and then attach the battery pack to
the saw.
NOTICE : Make sure that the latch on the
battery pack snaps into place and the
battery pack is secured to the tool before
beginning operation.
TO DETACH bATTERy
PACk (fIG. 1)
1. Lock the trigger switch in the “off” position.
2.
Depress the battery release buttons
located on the front of the battery pack
to release the battery pack.
3. Pull the battery forward to remove from
the tool.
CAUTION:
When placing battery
pack on the tool, be sure that the raised rib
on battery pack aligns with the groove on the
saw and the latches snap into place properly.
Improper assembly of the battery pack can
cause damage to internal components.
OPERATION
FIG. 1
FIG. 2
ATTACH
DETACH
Lock-off
button
Trigger
switch
LED
worklight