MasterForce 241-0779, Руководство оператора, Страница: 8 / 16

page 8
POWER SUPPLY
The power tool supply must match the
nameplate rating.
INSTALLING SIDE HANDLE (Fig. 2)
1. Unplug the angle grinder.
2. The side handle may be installed on the
right side or the left side of the tool.Thread
the side handle into the desired operating
position.
3. Securely tighten the side handle by turning
it clockwise.
ATTACHING AND ADJUSTING
THE GUARD (Fig. 3)
Attaching the guard
1. Unplug the angle grinder.
2. Make sure that the prominence on the
guard coincides with the groove in the
gear case cover.
3. Rotate the guard counter-clockwise to the
desired position
4. Pivot the guard-lock lever to secure the
guard in place.
Adjusting the guard
1. Unplug the angle grinder.
2. Pivot the guard-lock lever to loosen the
guard from the gear case cover.
3. Rotate the guard counter clockwise to the
correct position.
4. Pivot the guard-lock lever to tighten the
guard securely.
WARNING:
Never use your
grinder with the guard removed. It has
been designed for use only with the guard
attached. Attempting to use the grinder
with the guard removed will result in
loose particles being thrown against the
operator and possibly serious personal
injury.
MOUNTING THE WHEEL (Fig. 4)
WARNING:
Only use grinding
wheels with maximum safe operating
speed rated at or above 80m/s. Never use
damaged or imbalance grinding wheels.
Grinding wheel type 27 is recommended to
use on this grinder.
ASSEMBLY AND ADJUSTMENT
FIG. 2
FIG. 4
FIG. 3
Gear Case
Cover
Non-cutting
Guard
Guard-lock
lever
Screw
prominence