MasterForce 241-0779, Руководство оператора, Страница: 6 / 16

page 6
ADDITIONAL INSTRUCTIONS
FOR SAFE OPERATION
a) WARNING-To reduce the risk of injury
always wear eye protection. Everyday
eyeglasses have only impact-resistant
lenses; they are not safety glasses. All
users and bystanders must wear eye
protection that conforms to ANSI Z87.1
WARNING:
To reduce the risk
of injury, use only accessories rated
at least equal to the maximum speed
marked on the tool. Wheels and other
accessories running over the rated speed
can fly apart and cause injury. Grinding
wheels or any other accessory must have
a maximum safe operating speed greater
than the “no load RPM” marked on the
tool’s nameplate.
WARNING:
Always use the
proper guard when grinding. A guard
protects operator from broken wheel
fragments. When using grinding wheel
attachments, the guard must always be
attached to the tool and positioned for
maximum safety, so the least amount
of wheel is exposed from the side from
which the tool is being operated.
b) When operating a power tool outside,
use an outdoor extension cord
marked “W-A” or “W”. These cords
are rated for outdoor use and reduce the
risk of electric shock. The following table
shows the correct size to use, depending
on cord length and nameplate amperage
rating of the tool. When in doubt, use the
next heavier gauge. Always use UL and
CSA listed extension cords.
Recommended sizes of extension cords
Tool’s
Ampere
rating
Volts
Total length of cord in
feet Cord size in A. W.
G.(minimum)
25’ 50’ 100’ 150’
0-6
120 V~
18 16 16 14
6-10 18 16 14 12
10-12 16 16 14 12
12-16 14 12
Not
Recomm-
ended