MasterForce 241-0300, Руководство оператора, Страница: 17 / 24

17
ADJUSTABLE TORQUE CLUTCH (Fig.
8)
The torque clutch can be adjusted to
17+1 different settings. The higher the
torque setting, the more force the drill
produces to turn an object in either
LO or HI rotation speed.
When using the drill for different
driving applications, it is necessary
to increase or decrease the torque in
order to help prevent the possibility of
damaging screw heads, threads, workpiece, etc.
Adjust the torque by rotating the torque-adjustment ring.
The proper setting depends on the job and the type of bit, fastener, and
material you will be using. In general, use greater torque for larger screwed.
If the torque is too high, the screws may be damaged or broken.
For delicate operations, such as removing a partially stripped screw, use
a low torque setting. For operations such as drilling into hardwood, use a
higher torque setting.
NOTE: when adjusting the torque
clutch make sure that the speed
switch is either completely in the LO
or HI position.
CAUTION! do not change the torque
setting when the tool is running.
DRILL MODE (Fig. 9)
Select drill mode for drilling and other
heavy duty applications.
To select drill mode, rotate the torque
adjustment ring until the icon aligns
with the torque indicator and clicks
into position.
LED WORkLIGHT (Fig.10)
The LED worklight, located on the
front of the Drill/Driver, will illuminate
when the trigger switch is depressed.
This provides additional light on
the surface of the workpiece for
operation in lower-light areas. The
Fig. 8
To decrease torque
To increase
torque
17
Fig. 9
Torque indicator
Drill icon
Fig. 10
LED worklight