MasterCraft Maristar Series Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 94

background image

When the boat is hoisted from the water, use the lifting

eyes or a sling for easy, damage-free lifting.

DO NOT use the ski pylon for lifting. It is NOT designed as

a central lifting point. Also, DO NOT use the stern ski tow as

a lifting ring. The deck will be damaged. See the

Storage

Cradle

sub-section of the Lifting the Boat section of this Manual.

Also never lift a boat with a large amount of water in the

bilge or containing a water-filled device such as a Fat Sac or

ballast system. The extra stress will put an excessive load on

the hull and lifting equipment that may seriously damage the

boat and void your warranty.

USING

LIFTING

EYES

An overhead hoist with two-ton capacity (minimum) should

be used to lift your boat. Cables should be rated for at least
3500 pounds each. When lifting, keep the bow slightly higher
than the stern to prevent any possibility of water running into
the engine exhaust manifold.

USING

LIFTING

LIFTING

LIFTING

LIFTING

LIFTING

SLINGS

An overhead hoist with a two-ton capacity (minimum) should

be used. Slings must be 6 inches wide by 20 feet long and a
minimum of 3500 pounds capacity each. Use an eight-foot
spreader bar on each sling to prevent damaging side pressure
to the deck or gunwale molding.

LIFTING

2005

MASTERCRAFT

OWNERS

MANUAL

–

PAGE

12-1

T H E

BOAT

> > > > >

Lifting slings must never contact shafts, struts

or hardware protruding from the hull. Damage

caused by slings will void your warranty.

When your boat is out of the water, it is important

to support the hull correctly to avoid any hull damage

that will void your warranty.

STORAGE

CRADLE

If a storage cradle is used, the hull must be properly sup-

ported to prevent load damage. This can occur with as little as
15-pounds per square inch of pressure! DO NOT support the
boat by resting the hull on the keel. Vertical supports must
extend from the chine to the keel with no gaps between the hull
and cradle supports. A total support area of at least 250 square
inches is required for proper support. Protect all items extend-
ing from the hull from resting on the cradle or the ground. DO
NOT apply any load stress to the prop, shaft, rudder, swim
platform, water intake grate or other protruding items.

«
...
45
46
47
48
49
...
»

Содержание Maristar Series































































































Отзывы:

Нет отзывов

Похожие инструкции для Maristar Series

WAVEBREAK KAYAK 1426289

Бренд: Bestway Страницы: 12

Impression i40.1

Бренд: Elan Страницы: 44

CAP CAMARAT 925 WA

Бренд: Jeanneau Страницы: 86

SUN ODYSSEY 44I

Бренд: Jeanneau Страницы: 138

Бренд: Hobie Страницы: 28

Бренд: Hunter Страницы: 206

Packraft FamilyRaft

Бренд: Nortik Страницы: 9

Бренд: Nortik Страницы: 11

Бренд: Nortik Страницы: 29

Performance H2X

Бренд: Baja Страницы: 83

Бренд: Mercury Страницы: 13

Boat Life Inflatable RIB 180

Бренд: Nash Страницы: 48

Бренд: Jensen Marine Страницы: 9

Бренд: Cobalt Digital Inc Страницы: 134

Бренд: Cobalt Digital Inc Страницы: 130

Бренд: Cobalt Digital Inc Страницы: 136

Бренд: Axis Wake Research Страницы: 137

Бренд: Dragonfly Страницы: 80

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды